What type of oil does Honda Accord take?
Introduction
Honda Accord users need to know about the oil type and capacity before changing their engine oil.
Today, we will cover all the information related to the engine oil type of Honda Accord 2010, which will help you in making a detailed decision before changing your engine oil.
What is the type of oil for the 2010 Honda Accord & its capacity?
2010 Honda Accord oil type is 4.2 quarts of SAE 5W-20 oil for those who are equipped with a 4-cylinder engine.
Why Change Your Oil?
Changing your car’s oil is one of the easiest and satisfying maintenance tasks you can do on your own and it can help your engine run smoothly.
It will take less than an hour to complete the oil change on your vehicle.
For Honda Accord 2011, it is recommended to put 5w-20 motor oil. For accords after 2011, it is best to put 0w-20 motor oil.
We recommend you to put full-synthetic motor oil to increase the lifespan of your vehicle engine.
SAE Engine Oil Specifications
Different types of oil are classified based on their viscosities at various temperatures. Viscosity refers to the thickness or flow resistance of the oil. Thicker engine oils are more viscous compared to thin oils.
Each type of oil responds differently to temperature changes. For example, at high temperatures, 5W-30 oil is thicker than 5W-20 oil.
However, they maintain the same viscosity in colder weather or lower temperatures.
The number before the “W” indicates the oil’s flow rate at zero degrees Fahrenheit, as determined by the Society of Automotive Engineers (SAE).
The lower the rating, the better the oil is for starting engines in cold or winter conditions.
On the other hand, the number after the “W” represents the viscosity of the oil at 212 degrees Fahrenheit.
In hot environments, 5W-30 oil is thicker than 5W-20 oil, making it a better choice for usage.
Oil Types for Other Honda Accord Models
Here are the recommended oil types for different Honda Accord model years:
- 2003-2010 L4 & V6: 5W-20 oil (conventional or synthetic) and you can top it off with 0W-20 oil (synthetic).
- 2011-2020 L4 & V6: 0W-20 oil (synthetic).
- 2005-2007 Hybrid: 5W-20 oil (conventional or synthetic).
- 2014-2020 Hybrid or Plug-in: 0W-20 oil (synthetic).
Note: S refers to conventional oil, UFS refers to Ultra Full Synthetic oil, and L4 & V6 refer to the engine types.
How to Change the Oil in a 2010 Honda Accord?
To change the oil in a 2010 Honda Accord, you can follow these steps:
- Ensure that the engine is cool before starting. Take out the oil dipstick and oil fill cap from under the hood.
- Position an oil drain pan beneath the oil drain plug. Using a 17 mm socket wrench, loosen the plug and then remove it by hand. Let the oil drain into the pan.
- Utilize an oil filter wrench to remove the oil filter. Empty the old oil from the filter into the drain pan.
- Install a new oil filter. Before installing it, apply a small amount of oil to the rubber gasket on the new filter. Hand-tighten the filter, and then use an oil filter wrench to tighten it one-half turn further.
- Replace the crush washer on the oil drain plug and reinstall the plug. Tighten it to 29 ft-lb of torque.
- Pour 3 quarts of new oil into the oil tank. Check for any leaks.
- Lower the vehicle so it is resting on the ground and is level.
- Use the dipstick to check the oil level. Add more oil as needed until the dipstick shows that the oil level is full. Be cautious not to overfill the oil tank.
- Start the vehicle and let it idle for 2 minutes. Check the dipstick again and add more oil if necessary.
- Properly dispose of the used oil at a local oil change business or gas station. It is important to avoid dumping used oil into rivers, lakes, or the environment.
- Reset the “Oil Life” percentage on the odometer/instrument cluster. Press and hold the SEL/RESET button for approximately 10 seconds until the Oil Life message begins to flash. Release the button, hold it again for about 5 seconds until the Oil Life percentage resets.
.
Does It Matter What Oil Brand You Use?
Yes, it does matter. In short, it does matter. If you are using a reputable brand of oil then you would be guaranteed about the quality and performance because these brands invest in extensive research as well as development to create oils that offer optimal engine performance, even in tough conditions.
These oils are made to meet the industry standards and requirements to offer the necessary lubrication and protection for your engine.
Different brands have different synthetic engine oil qualities or ingredients. Although they might have identical SAE ratings, there are a few minor variations that have an impact on their performance.
Because of this, American Honda suggests using Honda Genuine Motor Oil in all of their automobile models.
However, you can also use any fully synthetic blend offered at the dealership or premium-grade traditional motor oil.
However, you should pay close attention to the viscosity rating that is mentioned in your owner’s manual.
As previously stated, SAE 5W-20 is required for a 2010 Honda Accord model. Additionally, look to see if it bears the API certification seal and the starburst quality assurance stamp.
You can make sure that your Accord runs at its peak performance by adhering to the manufacturer’s instructions and using the suggested 5W-20 viscosity oil.
Prioritising quality is crucial while choosing an oil. Look for lubricants that adhere to the requirements established by Honda, such as API certification and SAE standards.
Your engine will receive the necessary lubrication and protection if you use a premium synthetic or conventional oil.
Maintaining the smooth operation of your Honda Accord requires routine oil changes. Keep to the 7,500-mile or 12-month oil change recommendation, but be aware of any extreme driving circumstances that might necessitate more regular replacements.
Consult a trained mechanic if you’re uncertain or have any queries, or look up the answers in your owner’s handbook.
Based on the needs of your car, they can give you precise recommendations
.
